narrow-pitch connectors axt1, 2 ordering information for board-to-board and board-to-fpc connection narrow pitch (0.35mm) connectors p35s series features 1. ultra-small 0.35-mm pitch contributes to downsizing of equipment. socket compared to p4s already on the market: 11% header: space-saving of 12% (comparison using a 20-pin connector) 2. strong resistance to adverse environments! utilizes construction for high contact reliability. (see page 6 for details of the structure) 3. greater ?xibility in connector placement. pattern wiring to the connector bottom is possible because the undersurface of the connector is constructed with a molded covering. 4. automatic mounting inspection is facilitated by the gull-wing terminal shape which makes mounting veri?ation easy. 5. connectors for inspection available connectors are available that are ideal for inspection in module unit inspection and device assembly processes. applications compact portable devices ?ellular phones, dvc, digital cameras, etc socket header compliance with rohs directive note: if extra resistance to drop impact is required, we recommend using our p4 series. 6.05 (20 contacts) 5.23 (20 contacts) 3.60 2.35 so cket header pickup cover (material: sus) (both covered and uncovered types are available.) pickup cover (material: lcp) (both covered and uncovered types are available.) soldering terminals at the four corners soldering terminals at the four corners connector bottom: create any thru-hole and pattern wiring. soldering terminals at the four corners soldering terminals at the four corners 1.5mm pcb narrow-pitch connectors p35s fpc reinforcing plate before mating ideal for board-to-fpc connections after mating the simple lock mechanism ensures that the connector clicks into position when it is inserted for reliable single- action insertion on the pcb. this enables the number of pins to be doubled while the size re- mains the same as that for exist- ing fpc connectors. this, in turn, contributes to making products and equipment more compact. mated height / 1: for mated height 1.5 mm surface treatment (contact portion / terminal portion) 4: ni plating on base, au plating on surface (for ni barrier available) 4: ni plating on base, au plating on surface number of contacts (2 digits) 1: narrow pitch connector p35s (0.35 mm pitch) socket 2: narrow pitch connector p35s (0.35 mm pitch) header functions / 2: no pickup cover, without positioning bosses 6: with pickup cover, without positioning bosses axt 1 4 panasonic-electric-works.net/ac
narrow-pitch connectors axt1, 2 product types notes: 1. regarding ordering units; during production: please make orders in 1-reel units. samples for mounting con?mation: available in units of 50 pieces. please consult us. samples: small lot orders are possible. please consult us. 2. if you require the pickup cover, change the eighth digit of the part number from ? to ? in your order. note that the pickup cover is not available for some types depending on the number of contacts. check the latest product speci?ations. 3. the above part numbers are for connectors without positioning bosses, which are standard. when ordering connectors with positioning bosses, please contact our sales of?e. 4. connectors of different number of contacts are available on-demand production only. please contact us for more details. specifications 1. characteristics 2. material and surface treatment mated height number of contacts pa rt number pac king so cket header inner carton outer carton 1.5mm 20 axt120124 axt220124 3,000 pieces 6,000 pieces 22 axt122124 axt222124 24 axt124124 axt224124 26 axt126124 axt226124 28 axt128124 axt228124 30 axt130124 AXT230124 32 axt132124 axt232124 34 axt134124 axt234124 36 axt136124 axt236124 38 axt138124 axt238124 40 axt140124 axt240124 50 axt150124 axt250124 52 axt152124 axt252124 60 axt160124 axt260124 70 axt170124 axt270124 80 axt180124 axt280124 90 axt190124 axt290124 100 axt100124 axt200124 item speci?ations conditions electrical characteristics rated current 0.25a/contact (max. 4 a at total contacts) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 min. rated voltage is applied for one minute and check for short circuit or damage with a detection current of 1ma. insulation resistance min. 1,000m ? (initial) using 250v dc megger (applied for 1 min.) contact resistance max. 100m ? based on the contact resistance measurement method speci?d by jis c 5402. environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures soldering heat resistance max. peak temperature of 260 c (on the surface of the pc board around the connector terminals) infrared re?w soldering 300 c within 5 sec. or 350 c within 3 sec. soldering iron storage temperature ?5 c to +85 c (product only) ?0 c to +50 c (emboss packing) no freezing at low temperatures thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 100m ? sequence 1. ?5 c, 30 minutes 2. ~ , max. 5 minutes 3. 85 c, 30 minutes 4. ~ , max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 100m ? temperature 40 2 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 100m ? temperature 35 2 c, saltwater concentration 5 1% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 100m ? temperature 40 2 c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. lifetime characteristics insertion and removal life 50 times repeated insertion and removal speed of max. 200 times/hours unit weight 20-contact type: socket: 0.03 g header: 0.02 g pa rt name material surface treatment molded portion lcp resin (ul94v-0) contact and post copper alloy contact portion: ni plating on base, au plating on surface te r minal portion: ni plating on base, au plating on surface (except for front edge of terminal) however, the area adjacent to the socket terminal is exposed to ni on base. soldering terminal portion; socket: ni plating on base, pd + au ?sh plating on surface (expect for front edge of terminal) header: ni plating on base, au plating on surface (expect for front edge of terminal) 0 ? +3 0 panasonic-electric-works.net/ac
narrow-pitch connectors axt1, 2 dimensions (unit: mm) the cad data of the products with a cad data mark can be downloaded from: http://panasonic-electric-works.net/ac 1. socket (mated height: 1.5mm) ?without pickup cover z (note) y (note) te r minal coplanarity (contact and soldering terminal) c 0.1 a b 0.1 0.35 0.05 0.12 0.03 0.30 0.03 (0.90) 0.55 3.60 1.80 (0.66) 3.00 0.70 (suction face) 1.45 0.08 3.60 2.60 (0.50) general tolerance: 0.2 dimension table (mm) number of contacts/ dimension a b c 20 6.05 3.15 4.85 22 6.40 3.50 5.20 24 6.75 3.85 5.55 26 7.10 4.20 5.90 28 7.45 4.55 6.25 30 7.80 4.90 6.60 32 8.15 5.25 6.95 34 8.50 5.60 7.30 36 8.85 5.95 7.65 38 9.20 6.30 8.00 40 9.55 6.65 8.35 50 11.30 8.40 10.10 52 11.65 8.75 10.45 60 13.05 10.15 11.85 70 14.80 11.90 13.60 80 16.55 13.65 15.35 90 18.30 15.40 17.10 100 20.05 17.15 18.85 cad data ?with pickup cover pickup cover z (note) y (note) c 0.1 a b 0.1 0.35 0.05 0.12 0.03 0.30 0.03 (0.90) 0.55 3.60 1.80 (0.66) 3.00 2.80 (suction face) te rm inal coplanarity (contact and soldering terminal) 1.45 0.08 3.60 2.60 (0.50) general tolerance: 0.2 note: since soldering terminals are built into the body, the y and z parts are connected electrically. panasonic-electric-works.net/ac
narrow-pitch connectors axt1, 2 2. header (mated height: 1.5mm) ?without pickup cover 1.24 r 0.25 0.08 2.35 (0.45) r 0.20 soldering terminal (soldering terminal portion) a b 0.1 2.35 r 0.20 0.35 0.05 0.12 0.03 c 0.1 0.12 0.03 (0.33) 0.84 1.49 0.54 (suction face) 1.45 te rm inal coplanarity (contact and soldering terminal) general tolerance: 0.2 dimension table (mm) number of contacts/ dimension a b c c 20 5.23 3.15 4.55 6.73 22 5.58 3.50 4.90 7.08 24 5.93 3.85 5.25 7.43 26 6.28 4.20 5.60 7.78 28 6.63 4.55 5.95 8.13 30 6.98 4.90 6.30 8.48 32 7.33 5.25 6.65 8.83 34 7.68 5.60 7.00 9.18 36 8.03 5.95 7.35 9.53 38 8.38 6.30 7.70 9.88 40 8.73 6.65 8.05 10.23 50 10.48 8.40 9.80 11.98 52 10.83 8.75 10.15 60 12.23 10.15 11.55 13.73 70 13.98 11.90 13.30 15.48 80 15.73 13.65 15.05 17.23 90 17.48 15.40 16.80 19.98 100 19.23 17.15 18.55 20.73 cad data ?with pickup cover 1.64 2.35 (0.45) 0.08 d 2.35 (0.33) 0.84 1.49 b 0.1 0.35 0.05 0.12 0.03 c 0.1 a 2.05 0.12 0.03 1.75 (suction face) pickup cover soldering terminal (soldering terminal portion) (contact and soldering terminal) te rm inal coplanarity general tolerance: 0.2 panasonic-electric-works.net/ac
narrow-pitch connectors axt1, 2 embossed tape dimensions (unit: mm, common for respective contact type, socket and header) dimension table (mm) connector orientation with respect to direction of progress of embossed tape mated height number of contacts type of taping a b c d quantity per reel common for socket and header: 1.5mm max. 24 tape i 16.0 7.5 17.4 3,000 26 to 70 tape i 24.0 11.5 25.4 3,000 72 to 100 tape ii 32.0 28.4 14.2 33.4 3,000 socket and header are mated header so cket 1.50 0.15 ?tape dimensions (conforming to jis c 0806-1990. however, some tapes have mounting hole pitches that do not comply with the standard.) tape i tape ii pull out direction a 0.3 c 1.75 4 2 8.0 1.5 +0.1 0 dia. pull out direction a 0.3 c b 1.75 4 2 8.0 1.5 +0.1 0 dia. ?plastic reel dimensions (conforming to eiaj et-7200b) d 1 top cover tape taping reel embossed carrier tape embossed mounting-hole 380 dia. type direction of tape progress common for p35s socket header note: there is no indication on this product regarding top-bottom or left-right orientation. panasonic-electric-works.net/ac
narrow-pitch connectors axt1, 2 table of produt types ? : av ailable for sale notes: 1. the pickup surface shape of the inspection sockets is different from that of the standard sockets. (for details, refer to the product speci?ation diagram.) 2. please inquire numbers of contacts other than those listed above. 3. please inquire us regarding delivery times. 4. please keep ordering unit no less than 50 pieces per lot. 5. please inquire for further information. product types notes: 1. when placing an order, substitute the ? ? (asterisk) in the above part number with the number of contacts for the required connector. 2. the above part numbers are for connectors without positioning bosses, which are standard. when ordering connectors with positioning bosses, please contact our sales of?e. connector for inspection usage applications with 3,000 insertion and removal times narrow pitch connector p35s (0.35 mm pitches) for inspection usage product name number of contacts p35s for inspection 20 22 24 26 28 30 32 34 36 38 40 50 52 60 70 80 90 100 ? ?? ?? ?? ?? ?? ?? ?? ?? ? speci?ations part no. speci?ations part no. so cket with pickup cover without positioning bosses axt1e ?? 66 header with pickup cover without positioning bosses axt2e ?? 66 no pickup cover without positioning bosses axt1e ?? 26 no pickup cover without positioning bosses axt2e ?? 26 features 1. 3,000 insertion and removals (when as recommended) 2. same external dimensions and foot pattern as standard type. 3. improved mating insertion and removal have become easier due to a reduction in the mating retention force required by the simple locking structure and also in the amount of force needed for insertion and removal. (we cannot warrant anything regarding mating retention.) applications ideal for module unit inspection and equipment assembly inspection socket header compliance with rohs directive panasonic-electric-works.net/ac
narrow-pitch connectors axt1, 2 notes 1. as shown below, excess force during insertion may result in damage to the connector or removal of the solder. please be careful. also, to prevent connector damage please con?m the correct position before mating connectors. 2. keep the pc board warp no more than 0.03 mm in relation to the overall length of the connector 3. if extra resistance to shock caused by dropping is required, we recommend using our previous p4 series. 4. pc boards and recommended metal mask patterns connectors are mounted with high density, with a pitch interval of 0.35 mm, 0.4 mm or 0.5 mm. in order to reduce solder bridge and other issues make sure the proper levels of solder are used. the ?ures to the right are recommended metal mask patterns. please use them as a reference. max. 0.03 mm max. 0.03 mm socket (mated height: 1.5mm) recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 120 m (terminal portion opening area ratio: 60%) (metal portion opening area ratio: 100%) header (mated height: 1.5mm) recommended pc board pattern (top view) recommended metal mask pattern metal mask thickness: here, 120 m (terminal portion opening area ratio: 60%) (metal portion opening area ratio: 100%) 0.35 0.03 0.20 0.03 0.70 0.03 0.85 0.03 1.80 0.03 (1.20) 2.60 0.03 4.20 0.03 (0.80) 0.35 0.01 4.20 0.01 1.80 0.01 (1.20) 0.18 0.01 2.94 0.01 4.00 0.01 (0.53) 0.70 0.01 0.85 0.01 1.45 0.03 max. 0.90 (0.75) 2.95 0.03 : insulation area 0.35 0.03 0.20 0.03 0.45 0.03 0.70 0.03 0.65 0.03 1.65 0.03 (0.50) 0.35 0.01 0.18 0.01 0.45 0.01 0.70 0.01 1.65 0.01 0.65 0.01 1.75 0.01 2.75 0.01 (0.50) (0.50) for other details, please verify with the product speci?ation sheets. panasonic-electric-works.net/ac
|
